Posted on

La Dee Da Doll Customizing – Head Removal

I was unable to find very much information about customizing La Dee Da Dolls, so I thought I would go ahead and post some of my findings here. The first thing every customizer usually wants to know is how to remove the head and I am happy to report that removing the head of a La Dee Da is fairly easy. All you have to do is apply some blow dryer heat to the neck joint area until it becomes a little softer and more pliable, then you’ll want to gently pull out the head plug. The head plug is somewhat similar to Monster High head plugs in that it has a prong attached to the top of the plug. You can see this in the picture. Now here’s the bad news, the neck hole is really really small as you can tell from the picture. Because the neck hole is so small I don’t think it’s a very good candidate for rerooting. You might be able to do it using the reroot tool, but I have no idea how you could fit tweezers in the hole to pull out the old roots.

Looking on the bright side though, she can always wear wigs. Here I have her wearing a size 6-7 Kemper wig with all of her original hair tucked inside the wig cap. If you want to cutt off the original hair, I’m thinking a 5-6 wig ought to be a better fit. However I would like to point out that because of her cranium shape which is kind of like Blythe’s in that it’s not as rounded in the back as a normal skull, when you tuck all of the original hair inside the wig cap it can round out her cranium so it will not look weird. You can see the side view below.

So, this is as far as I have gotten with my customizing experiments on her, but I will be sure to post more info when I have it. Hopefully this will be helpful to anyone else who wishes to customize these dolls.

Posted on

Monster High Custom – Just Beginning


After my dollyhair order came in I wanted to get started on my custom Draculaura right away while I am still feeling all excited about the new hair. The first thing you have to do naturally is remove the head. Most tutorials I saw suggested running the head/neck area under water until the head became soft enough that it would allow the anchoring apparatus to be pulled out of it. Personally if I can avoid using water I will, and I found out that it’s quite easy to just take a blow dryer, blow dry the head/neck joint area for 30 seconds or so until hot, and then just pull and yank the head off while it’s still hot from the dryer heat. It took me all of a minute and I didn’t have to get anything wet or wait for hair to dry or anything.

Next step was to cut off all of her hair, lol. Anyway for whatever reason I felt like saving the cut hair, it’s too short to root with, but I imagine it could still be useful for MLP tails or maybe it could even be wefted and used for a Brownie wig, who knows.

After cutting the hair, you then need to take your tweezers and start pulling out what’s left of the hair from the inside of the head. Often times there is glue inside rooted doll heads, and there definitely is in MLP toys, but I was pleasantly surprised to find that there was NO GLUE inside my Draculaura head. You may be wondering then what was holding it all together, and I shall tell you what I suspect. I suspect they use heat to melt the hairs inside the head, but I can’t be positive. At first I thought it was loop rooted, but then I started noticing these tiny bits of melted plastic bits here and there falling out. Either way because there appears to be no glue, once you start breaking apart and pulling out plugs of hair, you can also pull hair from the outside of the head as well, which is helpful because Monster High dolls have small neck holes. Also one more tip is to squish your scalp close to your neck hole so you can easier see the hair and nab it with the tweezers.

After removing all of the hair, it’s time to wipe the face paint off. Customizers will argue up and down on what to use to do this and what not to use and they are often contradictory. Some people swear by Windsor and Newton brush cleaner, while others will tell you acetone, in the end it’s your call what to use. I myself for this particular doll used acetone. Acetone will without a shadow of a doubt remove all the paint from the head no problem, BUT it will take a while because the paint WILL SMEAR so expect to spend a good 15 minutes scrubbing the head. Don’t panic though once you see a smear, because it will come off with a fresh cotton ball and more acetone. Because the paint smears, you will also have to spend time removing the scalp color because there is no way you can remove the face well enough without accidentally hitting the scalp color and smudging it all over the place. My last piece of advice when dealing with acetone is be sure to rinse your doll’s head thoroughly in water afterwards!! Acetone is a solvent used to remove resins aka plastics, so it can destroy your doll if you do not fully rinse and wash all residue off afterwards. It should also go without saying that you should never leave a doll to soak in the stuff, like EVER.

Anyhow, moving along, in the above pic you may notice I have a spot circled on the dolls head and I have out a tube of glue. You see, when they rooted Draculaura’s hair in the factory they put some plugs so close together in her front part that it kinda made a big hole. 🙁 After some research I found that the best thing to do would be to fill the hole with a flexible glue. To be honest there really isn’t that much information that I was able to find out there for patching doll heads. The one site I did find with the most info suggested gel super glue, however just because a super glue says it’s gel doesn’t mean it will dry flexible. I figure that it is necessary for the glue to dry flexible otherwise the glue will just pop out during the reroot process. I have decided to try Loctite’s vinyl and plastic glue that dries flexible. Doll heads are vinyl afterall, so the theory is this should work. Anyway taking a toothpick dipped in glue, I carefully put a few drops in the problematic hole (the area circled). This particular glue dries in 30 minutes, but requires 24 hours to cure, so I plan to leave the doll alone now until sometime tomorrow. I’ll just have to wait and see how well it fares against the reroot tool!

EDIT! – I am happy to report that the Loctite vinyl and plastic glue works fabulously! 😀

Posted on

Rerooting Tutorials

While I’ve been waiting for my order from Dollyhair to arrive, I’ve been scouring the internet for any tutorials or general information I can find about re-rooting and the different kinds of fibers and such that you can buy. I figure I’d go ahead and make a posting and share what I’ve found so far.

Mohair and Alpaca related

My Monster Crush: This blog seems to focus on Monster High dolls, and this particular posting has information on making doll wigs out of feathers as well as re-rooting with mohair.

Wedge’s Mohair Tutorial: This is a image on flickr…look for the “BIG” link in the description to see the larger image. Anyhow this tutorial is Blythe centric and again focuses on how to reroot with mohair.

Mademoiselle Blythe: This is another Blythe focused blog, but this posting has a TON of information on the differences between mohair and alpaca, as well as an overview of rerooting and TONS of helpful links on where to find mohair and alpaca fibers as well as more tutorial links.

Saran and other fibers

The Manor: This specific posting has a lot of information and pictures to illustrate the differences between Nylon, Saran and Acetate doll hair.

Wide Eyed Girls: This site has one of my favorite nylon/saran reroot tutorials. It has lots of pictures and I think shows the simplest part thatching method for creating part lines n’ that.

Suppi.net: This link will take you to a search result page after searching for “reroot”. Has many different posts with random information on rerooting, BUT it most importantly contains information on good hair color matches for Monster High Draculaura complete with pictures and fiber names.

This is all I have collected so far. Of course Dollyhair, My Little Customs, and Restore Doll each have their own little tutorials section, so it would be a good idea to scour those too if you are looking for more tutorials. Lastly, if you happen to know of any other great rerooting tutorials or fiber information sites please feel free to post the links in the comments!! Any posts containing links though will have to be moderated by me first as a spam prevention, but don’t worry, they will get through!

Posted on

Monster High Draculaura

SoOOooo, I guess I’m getting on the Monster High customizing bandwagon because I bought my first Draculaura last week. The image to the left is of her straight out of the box, the only thing I did to her was trim her bangs to remove that weird, vampy, widows peak thing she had going, and I also let her hair down out of her ponytail. I think I’m finally starting to solidify how I want to customize her. I am fairly certain I will be re-rooting her hair, whether partial or full, and she is definitely getting her face repainted and her body blushed. Currently I’m waiting for my order of doll hair from dollyhair.com before I make any definite decisions about her hair. On the one hand her pink streaks have a punkish charm, but on the other hand it can kinda be tacky city. XP I’ve got to figure out what to do with her hair first though, because there is no way I’m rerooting after a custom paint only to wreck it with half my sealer coming off during the process, which is what happened during my Rainbow Dash custom project. Speaking of Dashy, I acquired the glue I needed and she’s drying right now. As soon as her glue dries I’ll put together her tail, pop her head back on and start the styling process on her mane.

Getting back to Draculaura now, I did find out that if you want to retain her natural hair and use a wig, then 6-7 is a perfect fit. Here she is trying on one of my MSD girl’s wigs. See, she’s starting to look cuter already! I also bought a Liv wig on clearance at Target to try, but I’ll be saving that for another posting. I’ve also dug up quite a few excellent rerooting tutorials in my quest for knowledge before I attempt what will be my second rerooting project, but my very first dolly one (since Dashy is a pony after all!). Anyhow I shall be trying to share as much info as I can with you as I go through the customizing process. I am very looking forward to another dolly project!!